Skip to main content

POP3 Protocol



The Post Office Protocol version 3 (POP3), is an application-layer Internet standard protocol, to retrieve e-mail from a remote server over a TCP/IP connection. POP3 and IMAP4 (Internet Message Access Protocol) are the two most prevalent Internet standard protocols for e-mail retrieval. Virtually all modern e-mail clients and servers support both

Overview

The design of POP3 and its procedures supports end-users with intermittent connections (such as dial-up connections), allowing these users to retrieve e-mail when connected and then to view and manipulate the retrieved messages without needing to stay connected. Although most clients have an option to leave mail on server, e-mail clients using POP3 generally connect, retrieve all messages, store them on the user's PC as new messages, delete them from the server, and then disconnect. In contrast, the newer, more capable Internet Message Access Protocol (IMAP) supports both connected (online) and disconnected (offline) modes of operation. E-mail clients using IMAP generally leave messages on the server until the user explicitly deletes them. This and other aspects of IMAP operation allow multiple clients to access the same mailbox. Most e-mail clients support either POP3 or IMAP to retrieve messages; however, fewer Internet Service Providers (ISPs) support IMAP. The fundamental difference between POP3 and IMAP4 is that POP3 offers access to a mail drop; the mail exists on the server until it is collected by the client. Even if the client leaves some or all messages on the server, the client's message store is considered authoritative. In contrast, IMAP4 offers access to the mail store; the client may store local copies of the messages, but these are considered to be a temporary cache; the server's store is authoritative.

Clients with a leave mail on server option generally use the POP3 UIDL (Unique IDentification Listing) command. Most POP3 commands identify specific messages by their ordinal number on the mail server. This creates a problem for a client intending to leave messages on the server, since these message numbers may change from one connection to the server to another. For example if a mailbox contains five messages at last connect, and a different client then deletes message #3, the next connecting user will find the last two messages' numbers decremented by one. UIDL provides a mechanism to avoid these numbering issues. The server assigns a string of characters as a permanent and unique ID for the message. When a POP3-compatible e-mail client connects to the server, it can use the UIDL command to get the current mapping from these message IDs to the ordinal message numbers. The client can then use this mapping to determine which messages it has yet to download, which saves time when downloading. IMAP has a similar mechanism, a 32-bit unique identifier (UID) that must be assigned to messages in ascending (although not necessarily consecutive) order as they are received. Because IMAP UIDs are assigned in this manner, to retrieve new messages an IMAP client need only request the UIDs greater than the highest UID among all previously-retrieved messages, whereas a POP client must fetch the entire UIDL map. For large mailboxes, this difference can be significant.
Whether using POP3 or IMAP to retrieve messages, e-mail clients typically use the SMTP_Submit profile of the Simple Mail Transfer Protocol (SMTP) to send messages. E-mail clients are commonly categorized as either POP or IMAP clients, but in both cases the clients also use SMTP. There are extensions to POP3 that allow some clients to transmit outbound mail via POP3 - these are known as "XTND XMIT" extensions.
MIME serves as the standard for attachments and non-ASCII text in e-mail. Although neither POP3 nor SMTP require MIME-formatted e-mail, essentially all Internet e-mail comes MIME-formatted, so POP clients must also understand and use MIME. IMAP, by design, assumes MIME-formatted e-mail.

Like many other older Internet protocols, POP3 originally supported only an unencrypted login mechanism. Although plain text transmission of passwords in POP3 still commonly occurs, POP3 currently supports several authentication methods to provide varying levels of protection against illegitimate access to a user's e-mail. One such method, APOP, uses the MD5 hash function in an attempt to avoid replay attacks and disclosure of the shared secret. Clients implementing APOP include Mozilla Thunderbird, Opera, Eudora, KMail, Novell Evolution, Windows Live Mail, Power Mail, etc.

POP3 works over a TCP/IP connection using TCP on network port 110. E-mail clients can encrypt POP3 traffic using TLS or SSL. A TLS or SSL connection is negotiated using the STLS command. Some clients and servers, like Google Gmail, instead use the deprecated alternate-port method, which uses TCP port 995

source: wikipedia
Labels:

Comments

Post a Comment

Popular posts from this blog

Advantages and Disadvantages of EIS Advantages of EIS Easy for upper-level executives to use, extensive computer experience is not required in operations Provides timely delivery of company summary information Information that is provided is better understood Filters data for management Improves to tracking information Offers efficiency to decision makers Disadvantages of EIS System dependent Limited functionality, by design Information overload for some managers Benefits hard to quantify High implementation costs System may become slow, large, and hard to manage Need good internal processes for data management May lead to less reliable and less secure data
1 comment
Read more

Inter-Organizational Value Chain

The value chain of   a company is part of over all value chain. The over all competitive advantage of an organization is not just dependent on the quality and efficiency of the company and quality of products but also upon the that of its suppliers and wholesalers and retailers it may use. The analysis of overall supply chain is called the value system. Different parts of the value chain 1.  Supplier     2.  Firm       3.   Channel 4 .   Buyer
Post a Comment
Read more

Big-M Method and Two-Phase Method

Big-M Method The Big-M method of handling instances with artificial  variables is the “commonsense approach”. Essentially, the notion is to make the artificial variables, through their coefficients in the objective function, so costly or unprofitable that any feasible solution to the real problem would be preferred, unless the original instance possessed no feasible solutions at all. But this means that we need to assign, in the objective function, coefficients to the artificial variables that are either very small (maximization problem) or very large (minimization problem); whatever this value,let us call it Big M . In fact, this notion is an old trick in optimization in general; we  simply associate a penalty value with variables that we do not want to be part of an ultimate solution(unless such an outcome is unavoidable). Indeed, the penalty is so costly that unless any of the  respective variables' inclusion is warranted algorithmically, such variables will never be p
Post a Comment
Read more